![]() To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth. To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass. With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out. With some smaller caliber cases you may notice the case mouths to be slightly belled. On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color. 9mm Luger Mixed HS Primed Brass - 1000ct Pulled - Mixed manufacturers - May contain minor dents/scratches - Lot may contain remanufactured brass In Stock 124. Minor dents are normally removed in the first firing and will not affect case life or performance. Load it your way with your own ammo using your powder and projectiles. Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur. This Auction is for 100 NEW SIG 9mm Luger Brass Cases Primed with CCI 500 Primers. These imperfections occur in the final tumbling wash operation after the case mouth has been annealed. This is not loaded ammunition.īrass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder. These casing are rigorously tested to ensure unparalleled durability and dependability, each casing undergoes rigorous in-line and postproduction quality assurance testing to ensure a flawless casing. Sig Sauer cases are made from American, premium brass.
0 Comments
Leave a Reply. |